• The UPS/Power
Conditioner cleans up any external source and produces
continuous computer grade power.
• Fans in the
doors of the case allow unit to run while the case is closed,
muffling the noise and the heat signature.
• Built in: Power Conditioner/Frequency
Converter/UPS/Generator.
• Additional
fuel tank, provides continuous runtime
at full load.
• Auxiliary fuel inlets and fuel pump draw from external
fuel sources for
longer run times.
• Global input voltages and frequencies allow
for deployment anywhere: 120/230 VAC, 50, 60 0r 400
Hz.
• Selectable outputs: 120
and/or 220 at 50, 60 or 400 Hz.
• Individual Load Control: local and/or remote via TTY
or SNMP software.
• 28 VDC Input with NATO
Slave connector for use with Military/Tactical Vehicles.
• Automatic Transfer Switch
(ATS) automatically selects
between external source or internal generator, allowing
the system to operate from any in-country power source
or external generator.
Operating Example:
When the Tactical Power Plant (TPP) is configured to be fed
from an external power grid, and that power is lost,
the TPP will revert to UPS power and an alarm will sound
signaling the end user to start the generator while the
load continues to operate without interruption from the
UPS batteries.
When the external power returns,
and remains stable for two minutes, the TPP automatically
transitions to the grid source and will shut down the generator
to conserve fuel. The same scenario is true for when operating
from a 28 VDC source.